manualshive.com logo in svg

Canon Oce VarioPrint 6000 MICR Series, Operation Manual, Page: 19 / 48

Share
Download
Canon Oce VarioPrint 6000 MICR Series Operation Manual Download Page 19

Deactivate transaction printing

Before you begin

Make sure that the list of [Scheduled jobs] is empty.

Procedure

1.

On the control panel, touch [System] -> [Transaction] -> [Transaction printing online] to put the
printer offline.
The text on the button changes from [On] to [Off].
Note that you can only switch the [Transaction printing online] function to offline when
• The transaction print jobs are ready.
• The printer contains no more print data.
• The printer has stopped because all the jobs are ready, not because an error has occurred.

When you switch [Transaction printing online] to offline, the connection to the host is
disconnected automatically.

2.

Touch [Transaction printing mode].
The text on the button changes from [On] to [Off].

NOTE

You can also put the printer offline via the [Transaction printing] section in the Settings
Editor.

Deactivate transaction printing

Chapter 2 - Transaction printing

19

Océ VarioPrint 6000 MICR line

Summary of Contents for Oce VarioPrint 6000 MICR Series

















































Reviews:

No comments