Canon Oce VarioPrint 6000 MICR Series, Operation Manual, Page: 15 / 48

Output recovery in case of an error
Introduction
The Océ VarioPrint 6000 MICR line is equipped with an efficient, reliable output recovery in case
of an error. By factory default, the output recovery is set to [Normal]. After the error is solved, the
job continues at the page where the error occurred automatically.
However, some printing environments require that multiple copies must be avoided. For
example, in transactions involving the printing of valuable documents such as cheques. In such
an environment, the [Output recovery] setting of your IPDS setup must be set to [Suppressed].
When the output recovery is suppressed, the printer will not automatically recover output. All
pending pages in the printer will be deleted and the stack will be ejected. The host system and
the operator are responsible for the recovery. The operator must restart the job manually on the
correct page.
• When the [Suppressed Mode] is [Normal] the printer reports the stacked counter to the host
system. The stacked counter is the last physically delivered page in the output location.
• When the [Suppressed Mode] is [Secure] the printer reports the committed counter to the host
system. The committed counter is the last digitally accepted page from the transaction
channel. The host does not automatically recover a page that was previously accepted. No
duplicate pages are printed. In case of [Secure] it may occur that some pages are not printed
after an error. The operator must check the output and reprint the pages that are missing.
The tables below describe what happens when either the normal output recovery or the
suppressed output recovery is selected.
Normal output recovery in IPDS
Job Job progress states Normal output recov‐
ery End up in the output
location after error re‐
covery
Sheets printed suc-
cessfully.
Are stacked at one of
the output locations.
Sheets are in output
location
Sheets copied to con-
troller memory (in-
cluding error pages).
Remain in controller
memory.
Once the error is re-
solved, the printer re-
starts by printing the
first page in the con-
troller memory.
4
Output recovery in case of an error
Chapter 2 - Transaction printing 15
Océ VarioPrint 6000 MICR line