manualshive.com logo in svg

Canon Oce VarioPrint 6000 MICR Series, Operation Manual, Page: 23 / 48

Share
Download
Canon Oce VarioPrint 6000 MICR Series Operation Manual Download Page 23

Handle the media messages

Introduction

The media catalog
• contains a list of predefined media and their attributes
• is an essential part of the system behavior of the Océ VarioPrint 6000 MICR line
• helps you to print your jobs more easily while using the correct media

For transaction printing, the content of the paper trays (in terms of media from the media catalog)
is translated into a format that the controller understands. However, the controller receives only a
limited amount of information (name or size of the media). This can lead to miscommunication
where the controller misses a media requirement. Then the controller will ask for the required
media via a message on the control panel. This [Media message] indicates the name or size of the
missing media.

Your response to the [Media message] depends on the mode in which the printer works, either:
• The tray-to-tray mode, or
• The tray-to-media mode.

This section describes how to respond to the [Media message] for both modes.

NOTE

A [Media message] will only occur when the printer description language is PCL.

[4] Example of a [Media message]

Handle the media messages

Chapter 2 - Transaction printing

23

Océ VarioPrint 6000 MICR line

Summary of Contents for Oce VarioPrint 6000 MICR Series

















































Reviews:

No comments