Canon oce 31x5e Daily Maintenance Download Page 78

Page: 78 / 137

Océ 31x5E Copy jobs & daily maintenance

Tray 4 will move down automatically as soon as the door is opened.

Take the paper out of the pack. If the pack of paper comes wrapped, remove
the top and bottom sheets.

Hold the paper by the short sides and bend it slightly. Then place it on top of
the remaining stack of paper in tray 4, making sure that you do not dislodge it
(see figure 45).

[45] Loading a package of paper into the tray

Note:

Preprinted or punched paper must be placed with the leading edge

towards the front of the copier and the perforation (if any) to the left.

Close the paper compartment door. The tray will move up automatically.

▼

Loading paper (trays 1,2,3)

Open the paper compartment door (see figure 44).

Pull out the paper tray as shown in the figure below:

[46] Sliding the paper tray out of the paper compartment

Summary of Contents for oce 31x5e










































































































































Search results

Summary of Contents for oce 31x5e

Reviews:

Related manuals for oce 31x5e

Brands by name

Popular brands

Canon oce 31x5e, Daily Maintenance

Search results

Summary of Contents for oce 31x5e

Reviews:

Related manuals for oce 31x5e

Brands by name

Popular brands