manualshive.com logo in svg

Canon NP6330, Service Handbook

Share
Download
Canon NP6330 Service Handbook Download Page 19

CHAPTER 2  STANDARDS AND ADJUSTMENTS

2-11

•

Newspaper Original DC Bias Adjustment in AE Mode [3] No. 303
After executing No. 402 and No. 304, make a copy of a newspaper. If the copy is too

dark or too light, make the following adjustments:

Making Adjustments
1) Start [3] in service mode, and select No. 303 using the keypad.

•

The indicator indicates ‘303’.

2) Press the OK key.

•

The indicator flashes the stored setting.

3) Using the keypad or the Zoom keys, change the setting according to the table below.

•

The indicator flashes the setting.

4) Press the OK key.

•

The new setting is stored.

•

The indicator stops flashing, and remains on.

•

Press the Copy Start key to start copying.

5) Press the Reset key twice.

•

These presses end service mode.

Table 2-4

Item

303

Function

AE slope

Description

Remarks

q

If the setting is
decreased in
service mode, the
newspaper copies
will be lighter.

w

If the setting is
increased in
service mode, the
newspaper copies
will be darker.

Lighter 7.5

Copy 

density 5

Darker

Test Chart

Newspaper Original 

density

1

2

Summary of Contents for NP6330













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands