Canon NP6330 Service Handbook Download

Page: 18 / 140

•

Scanning Lamp Activation Voltage Auto Adjustment in AE Mode [3] No. 304

Making Adjustment
1) Start [3] in service mode, and select No. 304 using the keypad.

•

The indicator indicates ‘304’.

2) Press the OK key.

•

The indicator flashes the stored setting.

3) Using the keypad or the Zoom keys, change the settings according to the table

below.

•

The indicator flashes the setting.

4) Press the OK key.

•

The new setting is stored.

•

The indicator stops flashing and remains on.

•

A press on the Copy Start key starts copying.

5) Press the key.

•

Item selection mode starts, indicating ‘304’.

•

If necessary, execute No. 303.

Table 2-3

Item

304

Function

AE scanning
intensity
adjustment

Description

Remarks

When the setting
is decreased in
service mode, the
AE copies will be
darker.

If the setting is
increased in
service mode, the
AE copies will be
lighter.

Lighter 7.5

Copy

density 5

Darker

Test Chart

Original

density

2-10

CHAPTER 2 STANDARDS AND ADJUSTMENTS

Summary of Contents for NP6330












































































































































Search results

Summary of Contents for NP6330

Reviews:

Related manuals for NP6330

Brands by name

Popular brands

Canon NP6330, Service Handbook

Search results

Summary of Contents for NP6330

Reviews:

Related manuals for NP6330

Brands by name

Popular brands