CHAPTER 5 PICK-UP/FEEDING SYSTEM
COPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-49
4. Points to Note When Installing the Pick-Up Roller
When installing the pick-up roller
q
to the pick-up assembly, be sure that the round
marking
w
on the rubber portion is toward the front of the copier.
The pick-up rollers are identified by color as follows:
If brass, use it for the front.
If silver, use it for the rear.
Figure 5-707
Do not separate the rubber portion of the pick-up roller from the collar.
5. Removing the Feeding Roller
1) Remove the pick-up roller.
2) Remove the pick-up roller from the front and the rear.
3) Remove the screw
q
, and remove the pick-up roller arm bushing
w
and the pick-up
roller arm
e
.
Figure 5-708
Note:
e
w
q
q
w
Collar
(front of copier)
