23
Web Menu Settings
This section describes the setting items on each of the pages of the
web menu.
Scanner Name Setting
If you click [Scanner Name Setting] on the left menu, the page below
is displayed.
Network Setting
If you click [Network Setting] on the left menu, the page below is
displayed.
Item
Description
Scanner Name
Displays the device name of the connected
scanner.
Item
Description
Default Value
DHCP
Enable ([ON]) / disable ([OFF]) the
DHCP protocol.
To assign an IP address using
DHCP, the DHCP server must be
running in your subnetwork.
ON
IP Address
Set the IP address of the device.
If DHCP is enabled, the IP address
obtained from it will be applied.
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
192.168.0.10
Subnet
Mask
Set the subnet mask of the device.
If DHCP is enabled, the subnet
mask obtained from it will be
applied.
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
255.255.255.0
