Canon MV530 Instruction Manual Download

Page: 67 / 164

Using the Full

Range of Features

Operating effects

Sound records/plays back normally.
When operating effects in TAPE CAMERA or CARD CAMERA mode, make
sure the program selector is set to

1. Press the DIGITAL EFFECTS button to open the digital effects

menu.

• D.EFFECT

, FADER, EFFECT and MULTI-S appear.

2. Select EFFECT.

• ART, BLK&WHT, SEPIA, MOSAIC settings appear.

3. Select the desired setting.

• You return to the digital effects menu.

4. Press the DIGITAL EFFECTS button to close the menu.

• The menu disappears and the name of your selected setting flashes in the

display.

5. If you’re in TAPE PLAY (VCR) mode, press the

(play) button.

6. Press the ON/OFF button.

• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or

deactivated.

Effect on/off

Select effect

If you’re in TAPE CAMERA mode:

Fade in- Press the start/stop button.

Fade out- Press the start/stop button.

If you’re in TAPE PLAY (VCR) mode:

Fade in- Press the

(play) button.

Fade out- Press the

(pause) button.

CAMERA

CARD

PLAY

(VCR)

TAPE

CAMERA

TAPE

#3_ MV550i/530i__E(39-86) 1/9/02 14:49 Page 67

Summary of Contents for MV530





































































































































































Search results

Summary of Contents for MV530

Reviews:

Related manuals for MV530

Brands by name

Popular brands

Canon MV530, Instruction Manual

Search results

Summary of Contents for MV530

Reviews:

Related manuals for MV530

Brands by name

Popular brands