Canon MV530 Instruction Manual Download

Page: 58 / 164

Using the Full

Range of Features

Turning the Image Stabilizer Off

MENU

With most camcorders, even the slightest hand movements will be noticeable
during telephoto recording. However, the MV550i/MV530i’s image stabilizer
allows you to obtain steady recordings even at high magnification.

To turn the image stabilizer off, open the menu and select CAM.SET
UP. Then select IMAGE S.

, set it to OFF and close the menu.

• The

mark disappears from the display when the stabilizer is off.

• The image stabilizer cannot be turned off when the program selector is set to

the

[

(Easy Recording) position.

Notes:

• Keep the image stabilizer turned off when the camcorder is mounted on a

tripod.

• The image stabilizer is designed to deal with a normal degree of camcorder

shake.

• The image stabilizer is not as effective as usual during the Low Light and Night

mode.

IMAGE S. ••ON

CAM.SET UP

(

40)

CAMERA

CARD

CAMERA

TAPE

#3_ MV550i/530i__E(39-86) 1/9/02 14:49 Page 58

Summary of Contents for MV530





































































































































































Search results

Summary of Contents for MV530

Reviews:

Related manuals for MV530

Brands by name

Popular brands

Canon MV530, Instruction Manual

Search results

Summary of Contents for MV530

Reviews:

Related manuals for MV530

Brands by name

Popular brands