manualshive.com logo in svg

Canon MultiPASS F20, Software User'S Manual

Share
Download
Canon MultiPASS F20 Software User'S Manual Download Page 117

Chapter 6

Fine-tuning the MultiPASS Suite   113

Chapter 6
Fine-tuning the MultiPASS Suite

6

To successfully operate your MultiPASS system, you need to be familiar 
with using the Status Monitor and removing the software.

Using the MultiPASS Status Monitor

6

You can use the Status Monitor to review the current status of the printer 
and any error conditions needing your attention. You cannot interrupt 
MultiPASS activity with the Status Monitor.

When the Status Monitor is open, it displays as a window on the 
Windows desktop and an icon in the Windows taskbar.

To open the Status Monitor, if currently closed:

On the Windows desktop, click Start, point to Programs or All Programs, 
point to MultiPASS Suite, and then click MultiPASS Status Monitor.

To display the Status Monitor menu:

Right-click the Status Monitor window or icon.

To display the Status Monitor window:

If the Status Monitor appears only as an icon on the taskbar, click Restore 
on the Status Monitor menu.

To specify the Status Monitor window as the top window:

Click Always On Top on the Status Monitor menu.

To display the port on which the printer is connected:

Click Device Information on the Status Monitor menu.

Status Monitor

 

window

Summary of Contents for MultiPASS F20

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands