Canon MultiPASS C50 Service Manual Download Page 119

Page: 119 / 272

1. MAINTENANCE LIST

1.1 Consumables

Level

Consumable

When

User

BJ cartridge

When

“REPLACE CARTRIDGE”

is displayed or

(BC-20 / BC-21 / BC-22)

when ink has run out.

INK cartridge

When using BC-21,and either the

“YMC

(BCI-21 Color

color”

“Black”

ink cartridge has run out.

/ BCI-21 Black)

Service Technician

None

Using BC-21e/ BC-22e BJ cartridge

BC-21e and BC-22e BJ cartridges are improved versions of BC-21 and BC-22 cartridges,

respectively. They are designed to be backward compatible with existing machines which

use the BC-21 or BC-22; therefore, they can be used with this machine, although full use
of their new features is not possible.

1.2 Cleaning

For the cleaning procedure, see

2. HOW TO CLEAN PARTS on page 3-4

Level

Location

When

User

Main unit outer covers

When dirty.

Printer platen

When ink adheres to the platen.

Separation roller

When document separation performance deteriorates.

Document feed/eject

When document feed/eject performance

roller

deteriorates.

Separation guide

When document separation performance deteriorates.

Scanning glass

When black vertical stripes

(contact sensor)

appear in copied or transmitted images.

White sheet

When the color or brightness of the copied or

transmitted image is not normal.

Service Technician

None

Chapter 3: Maintenance & Service

3-1

NOTE

Summary of Contents for MultiPASS C50

















































































































































































































































































Search results

Summary of Contents for MultiPASS C50

Reviews:

Related manuals for MultiPASS C50

Brands by name

Popular brands

Canon MultiPASS C50, Service Manual

Search results

Summary of Contents for MultiPASS C50

Reviews:

Related manuals for MultiPASS C50

Brands by name

Popular brands