Canon MP560 - PIXMA Color Inkjet, Service Manual, Page: 16 / 67

14 times APP sensor
error [6A90] An error occurred during
paper feeding or
purging. absorber right beneath the
purge drive system unit
stays in place and does not
contact the unit.
(2) Foreign material or paper
debris around the ASF unit;
remove foreign material.
(3) Cable connection
(4) Part replacement:
- Purge drive system unit
- Logic board
15 times USB host
Vbus
overcurrent [9000] The USB host Vbus
overloaded. (1) Part replacement:
- Logic board
16 times Pump roller
sensor error [5C20] The pump roller position
cannot be detected. (1) Cable connection
(2) Part replacement:
- Purge drive system unit
19 times Ink tank
position sensor
error [6502] None of the ink tank
position is detected. (1) Ink tank position;
confirm the ink tank
position.
(2) Re-set or replacement of ink
tanks
(3) Cable connection
(4) Part replacement:
- Spur unit
- Logic board
20 times Other errors [6500] An unidentified error or
a network error
occurred. (1) Part replacement:
- Logic board
21 times Drive switch
error [C000] Drive was not switched
properly. (1) Foreign material or paper
debris in the drive switch area;
remove foreign material.
(2) Ink tank conditions;
confirm that the ink tanks
are seated properly, or re-
set the ink tanks properly.
(3) Part replacement:
- Purge drive system unit
- ASF unit
- Carriage unit
22 times Scanner error [5011] An error occurred in the
scanner. (1) Document pressure sheet
conditions
(2) Cable connection
(3) Part replacement:
- Document pressure sheet
- Scanner unit
- Logic board
13 / 64