Canon MP560 - PIXMA Color Inkjet, Service Manual, Page: 11 / 67

of paper at error
occurrence is skipped
(not printed).
Ink may have run
out. [1600] U041 The following ink
may have run out.
Replacing the ink
tank is
recommended.
Replace the applicable
ink tank, or press the
Stop button to clear the
error without ink tank
replacement. When the
error is cleared by
pressing the Stop
button, ink may run out
during printing. - Spur unit
Ink tank not
installed. [1660] U043 The following ink
tank cannot be
recognized.
(Applicable ink tank
icon)
Install the applicable
ink tank(s) properly,
and confirm that the
LED's of all the ink
tanks light red. - Ink tank
- Carriage unit
Print head not
installed, or not
properly installed. [1401] U051 Print head is not
installed. Install the
print head.
Install the print head
properly. - Print head
- Carriage unit
Faulty print head
ID. U052 The type of print
head is incorrect.
Install the correct
print head.
Re-set the print head. If
the error is not cleared,
the print head may be
defective. Replace the
print head. - Print head
- Carriage unit
Print head
temperature sensor
error. [1403]
Faulty EEPROM
data of the print
head. [1405]
Multiple ink tanks
of the same color
installed. [1487] U071 More than one ink
tank of the
following color is
installed.
Replace the wrong ink
tank(s) with the correct
one(s). - Ink tank
Ink tank in a wrong
position. [1680] U072 Some ink tanks are
not installed in
place.
Install the ink tank(s) in
the correct position. - Ink tank
Warning: The ink
absorber becomes
almost full. [1700] --- The ink absorber is
almost full. Press
[OK] to continue
printing. Contact the
service center for
replacement. Replace the ink
absorber, and reset its
counter. [See
4-2.
Service Mode. ]
Pressing the OK button
will exit the error, and
enable printing without
replacing the ink
absorber. However,
when the ink absorber
The ink absorber
will become full
soon (service call
error).
8 / 64