Canon MP560 - PIXMA Color Inkjet, Service Manual, Page: 12 / 67

becomes full, no further
printing can be
performed unless the
applicable ink absorber
is replaced.
The connected
digital camera or
digital video
camera does not
support Camera
Direct Printing. [2001] --- The device may be
incompatible.
Remove the device
and check the
manual supplied
with the connected
device. Remove the cable
between the camera and
the machine.
The remaining ink
amount unknown
(raw ink present). [1683] U130 The remaining level
of the following ink
cannot be correctly
detected. Replace
the ink tank.
An ink tank which has
once been empty is
installed. Replace the
applicable ink tank with
a new one. Printing
with a once-empty ink
tank can damage the
machine.
To continue printing
without replacing the
ink tank(s), press the
Stop button for 5 sec. or
longer to disable the
function to detect the
remaining ink amount.
After the operation, it is
recorded in the machine
EEPROM that the
function to detect the
remaining ink amount
was disabled. - Ink tank
- Spur unit
Ink tank not
recognized. [1684] U140 The following ink
tank cannot be
recognized.
(Applicable ink tank
icon)
A non-supported ink
tank (an ink tank that is
sold in a different
region from where the
machine was
purchased) is installed
(the ink tank LED is
turned off). Install the
supported ink tanks. - Ink tank
Ink tank not
recognized. [1682] U150 The following ink
tank cannot be
recognized.
(Applicable ink tank
icon)
A hardware error
occurred in an ink tank
(the ink tank LED is
turned off). Replace the
ink tank(s). - Ink tank
9 / 64