Canon mp280 series, On-Screen Manual

Page: 495 / 715

Advanced Guide >
Scanning
> Scanning with Other Application Software
> What Is ScanGear (Scanner Driver)?
S201
What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the
output size and make image corrections when scanning.
ScanGear can be started from MP Navigator EX or from other applications that are compatible with a
standard interface called TWAIN. (ScanGear is a TWAIN-compatible driver.)
What You Can Do with This Software
This software enables you to preview scan results or set document type and output size, etc. when
scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens
There are three modes: Basic Mode, Advanced Mode and Auto Scan Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note
ScanGear starts in the last used mode.
Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode tab to scan easily by following three simple on-screen steps ( , and ).
Advanced Mode
Use the Advanced Mode tab to specify color mode, output resolution, image brightness, color tone, etc.
when scanning.
Стор. 495 із 715 What Is ScanGear (Scanner Driver)?