Canon MF8100 Series, Service Manual, Page: 235 / 296

Chapter 3
3-145
F-3-941
F-3-942
3.6.8.5 Removing the Lower Front Cover
0007-8514
1) Free the claw [1] using a flat-blade screwdriver; then, slide the lower
cover [2] to the left to detach.
F-3-943
3.6.8.6 Removing the Front Cover
0007-8515
1) Push the 2 bosses [1] used to hold the manual feed tray toward the inside
while pushing the guide assembly [2] toward the outside to free the
bosses.
F-3-944
2) Slide the front cover [1] to the left to detach.
F-3-945
3.6.8.7 Removing the Manual Feed Pickup Separation
Pad
0007-8516
1) Remove the screw [1], and detach the manual feed pickup separation pad
[2].
F-3-946
3.6.9 Registration Detection PCB
3.6.9.1 Removing the Fixing Assembly
0008-1827
1) Turn the lever [1] of the fixing assembly 90 deg in the direction of the
arrow.
2) While holding the grip [2], slide out the fixing assembly [3] toward the
front and out of the machine.
Whenever you have to replace the fixing assembly, be sure to disconnect the
power cord first. Also, be sure to wait unit the fixing assembly has cooled
before removing it after disconnecting the power cord.
[1]
[2]
[2]
[3]
[2]
[1]
[1] [1] [2] [2]
[2]
[3]
[1]
[1] [2]