Canon MF8100 Series, Service Manual, Page: 191 / 296

Chapter 3
3-101
F-3-660
3.5.6.8 Removing the Right Frame
0011-6599
1) Remove the 5 screws [1], and detach the right frame [2].
F-3-661
3.5.6.9 Removing the Shield Plate
0011-6620
1) Free the flat cable [1] from the connector.
2) Remove the 6 screws [2], and detach the shielding plate [3].
F-3-662
3.5.6.10 Removing the Rotary Drive Assembly
0007-8872
1) Disconnect the 4 connectors [1], and remove the 2 screws [2].
F-3-663
2) Disconnect the connector [1], and remove the 3 screws [2]; then, detach
the rotary drive assembly [3].
F-3-664
Be sure to tighten the self-tapping screw used to secure the rotary drive as-
sembly only at the end of the work.
3.5.6.11 Removing the Toner Cartridge Motor
0007-8873
1) Disconnect the connector [1], and remove the screw [2]; then, detach the
toner cartridge motor [3] from the rotary drive assembly.
F-3-665
3.5.6.12 Removing the Developing Rotary Motor
0007-8874
1) Remove the 2 screws [1], and detach the toner cartridge motor [2] from
the rotary drive assembly.
[1]
[2]
[1]
[1] [2]
[2]
[2]
[3] [1]
[2]
[1]
[1]
[1]
[1] [2] [2] [3] [2]
[1]
[2]
[3]