Canon MF8100 Series, Service Manual, Page: 162 / 296

Chapter 3
3-72
F-3-478
3.3.13.2 Removing the Scanner Unit
0007-8938
1) Remove the platen glass cover.
2) While removing the left and right claws, detach the hinge cover [1].
3) Remove the screw [2], and detach the cable guide [3].
F-3-479
4) Open the harness band [1], and free the 2 cables [2] connected to the
reader assembly.
F-3-480
5) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
F-3-481
3.3.13.3 Removing the SCNT Board Unit
0007-8940
1) Remove the 8 screws [1] from behind the scanner unit, and shift up the
SCNT board unit [2].
F-3-482
2) Open the SCNT board unit; then, disconnect the 6 connectors [1] and the
3 flat cables [2].
F-3-483
3.3.13.4 Removing the Speaker
0007-9118
1) Remove the 2 screws [1], and detach the speaker cover [2]; then, detach
the speaker [3].
F-3-484
3.4 LASER EXPOSURE SYSTEM
3.4.1 Laser/Scanner Unit
3.4.1.1 Removing the Rear Cover
0007-7964
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[2]
[3]
[1]
[3]
[2]
[1]
[3]
[2]
[2]
[1]
[2]
[1]
[1]
[1]
[1]
[2]
[1]
[2]
[1] [2]
[1]
[2]
[3]