Canon MF8100 Series, Service Manual, Page: 233 / 296

Chapter 3
3-143
3) Disconnect the 3 connectors [1], and remove the 8 screws [2]; then, detach
the main drive assembly [3].
F-3-929
3.6.7.13 Removing the Manual Pickup Feed Solenoid
0007-7128
1) Disconnect the 2 connectors [1], and free the harness [2] from the harness
guide [3].
2) Free the cable [1] of the density detection board and the ITB home
position detection board from the harness guide [2]: then, free the cable
from the clamp of the pickup solenoid cover [3].
3) Remove the screw [4], and detach the pickup solenoid cover [5].
F-3-930
4) Disconnect the connector [1], and remove the screw [2]; then, detach the
manual feed pickup solenoid [3].
F-3-931
3.6.8 Manual Separation Roller
3.6.8.1 Removing the Cassettes
0007-8510
1) Hold the grip, and take out the cassette.
3.6.8.2 Removing the Rear Cover
0007-8511
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-932
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-933
4) Close the reader assembly; then, detach the rear cover[1].
F-3-934
3.6.8.3 Removing the Right Cover (with the reader
assembly intact)
0007-8512
1) Free the cable [1] of the reader assembly.
[1]
[1]
[2]
[2]
[3]
[2]
[1]
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[3]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]