90
Maintenance and cleaning
STATUS light indicator
The status light indicator shows status of projector protection function. Check
status and POWER light indicator for good maintenance operation.
The projector turns off and the status indicator flashes orange.
The power is abnormal and the POWER indicator turns steady orange
Your projector powers off automatically to protect components within it when it is overheated.
The status indicator flashes when your projector is cooling down. Press the
POWER
button
to power your projector on again when it is cooled down to normal operation temperature.
Check the following:
– Is adequate clearance provided for your projector’s ventilation? Check the
installation status and any air outlet block.
– Is your projector installed at location close to outlet of air conditioning equipment?
Keep your projector away from air outlet of air conditioning equipment.
– Is the filter in clean condition? Please clean the filter regularly.
The POWER indicator turns steady orange and your projector powers off to
protect its internal components whenever an abnormality is detected. Unplug the
AC power cord and connect again. Restart your projector and run checkup routine.
If the problem persists, unplug the AC power cord and call your service center for
checkup and repair.
The POWER indicator
turns steady orange
Note:
The POWER indicator stops flashing when
your projector’s internal temperature cooled
down to normal and it is powered on again.
The STATUS indicator
flashing orange