![background image](http://html.mh-extra.com/html/canon/lh-wu350ust/lh-wu350ust_user-manual_62466049.webp)
49
Display
Select this function can adjusts background color.
Press < MENU > button on the remote controller or on
the top control panel to display the OSD menu.Press
button to select the Display menu ,then press <OK>
or
button.
1) Press
button to select [
B
ackground display]
menu.
2) Press <OK> button.
3) Press
button to select reqiured item .
Blue...... The entire projection area display blue.
Black......The entire projection area display black.
Background display
...
Display
Auto PC adj.
Fine sync
0
0
0
0
H position
V position
H.Size
Aspect
Upper left
Blue
Menu position
Background display
Signal Format
Auto
None
Image Flip
Background display menu
Note:
This function will be invalid once
you select input signal as USB
Display, Memory viewer and
Network.
Signal Format
Signal Format selection
If a PC is selected as the input signal source, your projector will detect and adapt to its signal for-
mat automatically. Correct image can be displayed without any setup operation.
Your projector will display one of the following:
Auto
If your projector failed to identify signals
not shown in the signals format table, the
“Auto” message will display in the Signal
Format menu. The Auto PC Adjusting
function will make necessary adjustment
to your projector to project valid imag-
es. If images are displayed incorrectly,
adjust it manually.
-----
No PC signals detected. Check the con-
nection between PC and your projector.
Display
Signal Format
1024x768, 60HZ
1920x1200, 60HZ
- - - -
- - - -
1280x800, 60HZ
Signal format menu
The selected system displays in the
PC system menu.
Note:
The computer system menu will be disabled once HDMI-1,HDMI-2, Memory Viewer Network
or USB Display has been selected.