57
Setting
Note:
●
HDMI option can be chosen only in HDMI-1 and
HDMI-2 channel.
When the external device is connected to the HDMI
terminal of the projector, and the images can not be
projected normally, please switch on the Image or
Sound setting.
Press < MENU > button on the remote controller or on
the top control panel to display the OSD menu.Press
button to select the Setting menu ,then press <OK>
or
button to enter the sub-menu
.
1) Press
button to select [HDMI Setup] menu.
2) Press <OK> button.
●
Display
[HDMI Setup]
instantly
.
3) Press
button to select [
Image
] or [
Sound
] .
4) Press <OK> button.
HDMI Setup
Note:
●
The best settings about projectors may differ slightingly from your external output device .
●
For external output, please refer to the instructions for use of the external device.
Auto
Set the signal level automatically.
Limited
Input the limited signal level from 16 to 235.
HDMI Input Range
HDMI
When connect to the HDMI cable to transmit images and audio while the users
don't need connect to audio signal separately.
MODE1-4
Change the HDMI reception level according to the AV device connected to the
HDMI input terminal. If noise appears in the image or the image does not appear,
change the settings.
Sound
EQ Setting
HDMI Setup
...
Setting
Standby mode
Cooling fast
Closed caption
Key lock
Sound
HDMI setup
Off
Eco
Off
Off
On
Direct Power on
High Altitudet
Immediate
Dynamic Contrast
