18
Before Installation
■
Do Not Touch the Lens with Bare Hands
■
Install at a Sufficient Distance from Walls and Other
Obstructions
■
Be Careful of Condensation
■ At Altitudes above 1,400 m (4,593.2'), Adjust the
Settings
Caution
Caution
Do not touch the lens with bare hands. Any smudges or
fingerprints on the lens may affect image quality.
If the air intake or exhaust vent is
blocked, heat will accumulate inside
the projector, possibly resulting in a
shortened projector
lifetime or a malfunction.Similarly,
do not install in narrow, enclosed
spaces with poor ventilation.
Install the projector leaving at least
50cm (1.6') / 100cm(3.3') between
air Intake/exhaust vents and walls.
If the temperature of the room rises suddenly, moisture in the air may condense on
the projector lens and mirror, causing the image to become blurred. Wait until the
condensation has evaporated for the image projected to return to normal.
Projector settings must be adjusted when using the projector at altitudes of 1,400 m
(4,593.2') or higher. Specifically, refer to instructions for [High altitude] (
) in the
[Setting] menu.
Air intake
Air outlet
(For heat exhaust)
