162
Additional Information
:
/
9
/
8
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
Cannot convert scenes recorded at 50P
- Scenes that were recorded at 50P cannot be converted to MP4.
Cannot convert the scene
- You cannot convert scenes recorded using another device.
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (
A
55, 57) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes).
Delete some scenes (
A
55) to free some space.
Cannot divide the scene
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Delete some scenes (
A
55) and photos (
A
57) and try dividing the scene again.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Delete some scenes (
A
55) and photos (
A
57) and try dividing the scene again.
Cannot load canvas
- The canvas file that was saved on the memory is corrupted.
- Canvas data cannot be read from canvas files created using other devices and then trans-
ferred to a memory card connected to the computer.
Cannot play back
- You may not be able to play back scenes recorded or edited using another device.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
:
/
9
/
8
Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings (
A
108) and initialize the
built-in memory using the [Complete Initialization] option (
A
31). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings (
A
108) and initialize the
memory card using the [Complete Initialization] option (
A
31). If the problem persists, use a
different memory card.
COP
Y
Downloaded From VideoCamera-Manual.com Manuals
