136
Wi-Fi Functions
[Search for Access Points] method. Refer also to the router’s instruc-
tion manual.
1 [WPS: Button] method
Press and hold the WPS button on the wireless router.
• Depending on the router, the amount of time required may differ.
• Make sure the router’s WPS function is activated.
[WPS: PIN Code] method
From a computer or similar device connected to the wireless router,
use the Web browser to open the router’s WPS settings screen. After
the 8-digit PIN code appears on the camcorder’s screen, enter it into
your router’s WPS settings screen.
2 Within 2 minutes, touch [OK] on the camcorder’s screen.
• The camcorder will connect to the wireless router.
• You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected
Setup while it is in progress.
• After the connection is established, continue using the function you
were previously using. For details, refer to the procedure in
Viewing
and Changing Wi-Fi Settings
(
A
139),
Sharing Your Recordings
Using Web Services
(
A
130) or
Playback on a Computer
(
A
133)
as necessary.
Searching for Access Points
The camcorder will automatically detect access points in the vicinity.
After you select the desired access point, you simply enter the pass-
word (encryption key) to connect the camcorder.
To enter text for the various settings, use the virtual keyboard (
A
137).
1 Note the access point’s network name (SSID) and encryption key.
2 When the detected access points appear, touch the desired
access point and then touch [OK].
You can touch [
Í
] and [
Î
] to go through the detected access points.
3 In the field for encryption key, enter the encryption key and then
touch [OK].
If the access point selected in step 2 did not have a [
C
] icon, this step
is not necessary.
COP
Y
Downloaded From VideoCamera-Manual.com Manuals
