Canon LEGRIA FS307 Instruction Manual Download Page 91

Page: 91 / 111

CANNOT PLAY THE MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER

- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this

camcorder (

28).

CANNOT RECORD

- There is a problem with the memory.
- This message can also appear if condensation has formed (

100). Wait until the camcorder dries

completely before resuming use.

CANNOT RECORD CANNOT ACCESS THE BUILT-IN MEMORY

- There is a problem with the built-in memory.

CANNOT RECORD CHECK THE CARD

- There is a problem with the memory card.

CANNOT RECORD MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE

CAMCORDER

- The camcorder’s built-in memory was initialized using a computer. Initialize the built-in memory with this

camcorder (

28).

CANNOT RECORD MOVIES ON THIS CARD

- Movies cannot be recorded on a memory card with a capacity of 64 MB or less.

CANNOT RECORD MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER

- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this

camcorder (

28).

CARD FULL

- The memory card is full. Erase some recordings (

39, 59) to free some space or replace the memory card.

CARD REACHED THE MAXIMUM NUMBER OF SCENES

- The memory card already contains 3,999 scenes (the maximum number of scenes); no further scenes can be

copied onto the memory card. Delete some recordings (

39) to free some space.

CARD INITIALIZE USING ONLY THE CAMCORDER

- There is a problem that prevents accessing the memory card. Initialize the memory card with this camcorder

(

28).

CARD UNABLE TO RECOGNIZE THE DATA

- The memory card contains scenes recorded in a different television system (NTSC).

CHANGE THE BATTERY PACK

- Battery pack is exhausted. Replace or charge the battery pack (

16).

CHECK THE CARD

- Cannot access the memory card. Check the memory card and make sure it is inserted correctly (

27).

- A memory card error occurred. The camcorder cannot record or display the image.
- You inserted a MultiMedia Card (MMC) into the camcorder. Replace it with an SD/SDHC memory card

compatible for use with this camcorder.

- If after the message disappears,

appears in red, perform the following: Turn off the camcorder and

remove and reinsert the memory card. If

turns back to green you can resume recording/playback.

- Initialize the memory card (

28). (Doing so will erase all the recordings on the memory card.)

Summary of Contents for LEGRIA FS307
















































































































Search results

Summary of Contents for LEGRIA FS307

Reviews:

Related manuals for LEGRIA FS307

Brands by name

Popular brands

Canon LEGRIA FS307, Instruction Manual

Search results

Summary of Contents for LEGRIA FS307

Reviews:

Related manuals for LEGRIA FS307

Brands by name

Popular brands