3
3
3-2
3-2
Disassembly/Assembly > List Of Parts > External View
Disassembly/Assembly > List Of Parts > External View
Preface
●
Outline
This chapter describes disassembly and reassembly procedures of the printer.
Note the following precautions when working on the printer.
1. CAUTION: Before disassembling or reassembling the printer, be sure to disconnect its
power cord from the electrical outlet
2. During disassembly, reassembly or transportation of the printer, remove the cartridge if
required.
When the cartridge is out of the printer, put it in a protective bag even in a short period of
time to prevent the adverse effect of light.
3. Reassembling procedures are followed by the reverse of disassembly unless otherwise
specified.
4. Note the length, diameters, and locations of screws as you remove them. When
reassembling the printer, be sure to use them in their original locations.
5. Do not run the printer with any parts removed as a general rule.
6. Ground yourself by touching the metal part of the printer before handling the PCB to
reduce the possibility of damage caused by static electricity.
7. When you replace the part that the rating plate or the product code label is attached, be
sure to remove the rating plate or the product code label and put it to the new part.
List Of Parts
External View
[7]
[1]
[8]
[9]
[2]
[3]
[10]
[4]
[5]
[6]
[11]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[12]
No.
Name
No.
Name
[1]
Auxiliary Tray
[11]
Rear Cover
[2]
Multi-purpose Tray
[12]
Face-up Output Tray
[3]
Front Cover
[13]
Pressure Release Cover
[4]
Open Button
[14]
Left Cover
[5]
Upper Cover
[15]
USB Host
[6]
Control Panel
[1
6
]
USB Device
[7]
Right Cover
[17]
LAN Connector
[8]
Power Switch
[18]
Duplex Unit Cover
[9]
Face-down Output Tray Cover
[19]
Power Socket
[10] Paper Cassette
T-3-1
