Canon LBP6670dn Series Service Manual Download Page 62

Page: 62 / 181

2-46

Technology > MEAP > Enhanced System Application Management > Procedure Installing Login Services

2) Click the [ SWITCH ] button of the login service you want to switch to.

3) Check that the status of the selected login service application has changed to [ Start after

Restart ]. Then, log out of SMS and restart the device.

F-2-99

F-2-100

■

Procedure Installing Login Services

Use the following procedure to install the login services.
1) Access SMS, and then click [ System Management ] > [ Enhanced System Application

Management ].

2) Click the [ Browse ] button, and specify the Enhanced System Application file/License file.

3) Click [ Install ] button.

F-2-101

F-2-102

Summary of Contents for LBP6670dn Series






















































































































































































Search results

Summary of Contents for LBP6670dn Series

Reviews:

Related manuals for LBP6670dn Series

Brands by name

Popular brands

Canon LBP6670dn Series, Service Manual

Search results

Summary of Contents for LBP6670dn Series

Reviews:

Related manuals for LBP6670dn Series

Brands by name

Popular brands