Canon Laser Shot LBP3360 User Manual Download Page 50

Page: 50 / 338

2-13

Installing the Pr

inter

Carrying the Printer to the Installation Site

IMPORTANT

•

When taking out the printer, secure sufficient space around the printer.

•

Carry the printer with the tape that secures the front cover, manual feed slot cover,
and duplex unit cover attached.

Put the printer down carefully at the installation site.

CAUTION

Put the printer down slowly and carefully. Be careful not to hurt your
hands.

Set the paper cassette in the printer.

Push the paper cassette into the printer firmly until the front side of the cassette is
flush with the front surface of the printer.

CAUTION

When setting the paper cassette, be careful not to catch your fingers.

Summary of Contents for Laser Shot LBP3360



















































































































































































































































































































































Search results

Summary of Contents for Laser Shot LBP3360

Reviews:

Brands by name

Popular brands

Canon Laser Shot LBP3360, User Manual

Search results

Summary of Contents for Laser Shot LBP3360

Reviews:

Brands by name

Popular brands