manualshive.com logo in svg

Canon Laser Shot LBP3360, User Manual

Share
Download
Canon Laser Shot LBP3360 User Manual Download Page 169

6-14

Pr

inting En

vironment Settings

6

SETUP Menu Settings

- When printing from UFR II Printer Driver, you can load paper either in portrait or 

landscape orientation. However, when printing custom size paper of its long 
edges 215.9 mm or less, load the paper in landscape orientation. When you are 
not using UFR II Printer Driver, load the paper in portrait orientation.

NOTE

•

Select CUSTOM SIZE or CUSTOM SIZER when you want to specify custom size 
paper using application and print it. If a message that prompts you to change the 
size of the paper appears during printing, press the 

 (Online) key to clear the 

error before printing again.

•

You can obtain the same result by specifying the setting for CASSETTE1 SIZE in 
the SELECT FEEDER menu.

CASSETTE2 SIZE

A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, A5, B5

Specifies the size of the paper loaded in the paper cassette of the paper feeder 
(Cassette 2).

IMPORTANT

When you change the orientation of the custom size paper loaded in the paper 
cassette frequently, it is convenient if CASSETTE2 SIZE is set to MIXED SIZES. 
When CASSETTE2 SIZE is set to MIXED SIZES, you do not need to specify the 
setting for CASSETTE2 SIZE each time you change the paper orientation. 
However, observe the following when specifying MIXED SIZES.
- Make sure that the size of the paper loaded in the paper cassette matches the 

paper size specified in the printer driver before printing. If they do not match, the 
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a 
paper jam may occur. Be sure to check if the paper size specified in the printer 
driver matches the size of the paper loaded in the paper cassette before using the 
printer. However, if SPECIAL MODE J (See p. 6-31) is set to ON, the printer prints 
without checking the paper size even when the paper size specified in the printer 
driver and the size of the paper loaded in the paper cassette do not match.

- When printing from UFR II Printer Driver, you can load paper either in portrait or 

landscape orientation. However, when printing custom size paper of its long 
edges 215.9 mm or less, load the paper in landscape orientation. When you are 
not using UFR II Printer Driver, load the paper in portrait orientation.

NOTE

•

Select CUSTOM SIZE or CUSTOM SIZER when you want to specify custom size 
paper using application and print it. If a message that prompts you to change the 
size of the paper appears during printing, press the 

 (Online) key to clear the 

error before printing again.

•

You can obtain the same result by specifying the setting for CASSETTE2 SIZE in 
the SELECT FEEDER menu.

•

This item is displayed only when the optional paper feeder is installed.

Summary of Contents for Laser Shot LBP3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands