manualshive.com logo in svg

Canon Laser Shot LBP3360, User Manual

Share
Download
Canon Laser Shot LBP3360 User Manual Download Page 268

8-31

Tr

oub

leshooting

8

Message List

<30 MEMORY FULL>

<Auto Error Skip>

Cause

The work memory has run out while the system is processing the data.

Remedy

The printer continues printing by pressing the 

 (Online) key. However, the 

data with which an error has occurred may not be printed properly.

<32 2-SIDED ERROR>

<Auto Error Skip>

Cause

The printer received 2-sided printing data of paper sizes (including the 
orientation) or paper types unavailable for automatic 2-sided printing.

Remedy 1 The printer continues printing by pressing the 

 (Online) key. However, the 

data on each side is printed on two pages.

Remedy 2 After performing a soft reset in the RESET menu, change the setting to a paper 

size or type available for automatic 2-sided printing, and then print again.

<33 WORK MEM.FULL>

<Auto Error Skip>

Cause

The work memory for each operation mode cannot be secured.

Remedy 1 The printer continues printing by pressing the 

 (Online) key. However, the 

data with which an error has occurred is not printed properly.

IMPORTANT

When you continue printing by pressing the 

 (Online) key, be aware that the data of 

macro that is already registered may be deleted.

Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using 

the following procedure, and then print again.

•

Perform a hard reset or cycle the power of the printer (Be aware that all the 
data in the memory that the printer has received will be deleted).

<35 TABLE FULL>

<Auto Error Skip>

Cause

The number of the documents in a job has exceeded 16.

Remedy

The printer continues printing by pressing the 

 (Online) key. However, the 

job with which an error has occurred is not printed.

<38 LOW IMGE QLTY>

<Auto Error Skip>

Cause

The printer cannot process the data because it is too complicated.

Remedy 1 The printer continues printing by pressing the 

 (Online) key. However, the 

printer prints with the image quality level being lowered.

Summary of Contents for Laser Shot LBP3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands