Canon LASER SHOT LBP-3600 User Manual Download Page 373

Page: 373 / 459

Network Board

6-42

Optional Accessor

ies

Remove the screw and protective plate for the expansion slot.

IMPORTANT

The removed protective plate and screw are required when the network board is
removed. Keep them where they will not get lost.

Insert the network board into the expansion slot.

Hold the metal panel portions of the network board and insert the board while
aligning it with the guide rail inside the expansion slot.

IMPORTANT

•

Do not touch the network board parts, printed wire, or connectors with your hands.

•

Insert the printer connector of the network board securely into the connector inside
the expansion slot.

ERR LNK 100

NB-C1

Summary of Contents for LASER SHOT LBP-3600












































































































































































































































































































































































































































































Search results

Summary of Contents for LASER SHOT LBP-3600

Reviews:

Related manuals for LASER SHOT LBP-3600

Brands by name

Popular brands

Canon LASER SHOT LBP-3600, User Manual

Search results

Summary of Contents for LASER SHOT LBP-3600

Reviews:

Related manuals for LASER SHOT LBP-3600

Brands by name

Popular brands