![background image](http://html.mh-extra.com/html/canon/l1/l1_service-manual_61348076.webp)
6-27
6-27
6
6
Installation
Installation
Post-installation check
After installing this equipment, check the following setting.
1) Turn on the power switch of the accessory.
2) Turn on the main power switch of the host machine.
CAUTION:
Be sure to turn on the main power switch of the host machine after turning on
the power switch of the accessory.
3) Turn OFF the main power switch as instructed on the shut-down sequence and turn it ON again.
MEMO:
In case that the host machine setting is changed from a printer model to a
copier model, since the screen to prompt the shutdown is displayed on the
control panel, the power needs to be turned OFF as instructed on the shut-
down sequence.
4) SERVICE MODE > COPIER > OPTION > FNC-SW > W/SCNR (Lv.1)
5) Check that it is “1” (default : 0).
6) Exit the service mode.
Summary of Contents for L1
