Canon JX510P User Manual Download

Page: 25 / 98

Sending Faxes

ISH

Sending Faxes

Sending Documents

Before you send a document, see “Document Requirements” on page 19, and “Loading Documents
and Paper” on page 21.

Direct Sending

Load the document face up into the ADF.

See “Loading Documents and Paper” on page 21.
You can set the scanning resolution and contrast (see page 24).

Dial the receiving party’s fax number.

Use one of the dialing methods described in this chapter.

Press [Start/Copy].

The fax begins sending.

Manual Sending

If you would like to first speak with the person you are sending the document to, use manual
sending.

Load the document face up into the ADF.

See “Loading Documents and Paper” on page 21.
You can set the scanning resolution and contrast (see page 24).

Pick up the Handset or press [Hook] and dial the receiving party’s fax number.

Use one of the dialing methods described in this chapter.

Note

If paper jams, see “Troubleshooting” on page 72.

You can send up to 20 A4-size (10 legal-size) pages at a time (based on the Canon FAX Standard

Chart No.1, standard resolution). You cannot add pages while the fax is sending.

The fax stores the document temporally in memory when sending a document, however, when memory

is full, it will send the document as it scans the document without storing document in memory.

Note

If an error occurs during sending, the fax beeps intermittently for a few seconds and an error

message appears on the LCD. If this happens, correct the problem and then press [Stop/Reset],

then try sending the document again. See “LCD Messages” on page 85.

The fax automatically redials if the receiving party does not answer or if the line is busy. (You

can specify the number of times it redials; see <AUTO REDIAL> on page 57.)

TEL=

3456xxxx

TEL=

3456xxxx

Summary of Contents for JX510P



































































































Search results

Summary of Contents for JX510P

Reviews:

Related manuals for JX510P

Brands by name

Popular brands

Canon JX510P, User Manual

Search results

Summary of Contents for JX510P

Reviews:

Related manuals for JX510P

Brands by name

Popular brands