Canon JX510P User Manual Download

Page: 14 / 98

Before Using Your Machine

ENGLI

Turning the Machine ON and OFF

Turn on the machine before using.

Turning on the Machine

Before turning on the machine, confirm that the FINE Cartridge is set into place.

To turn on the machine, press [ON].

[ON] flashes green for a while, and then turns on.

Turning off the Machine

To turn off the machine, press [ON].

The machine is off after <SHUTTING DOWN...> is displayed on the LCD.

Note

If preparatory operations are not yet finished, follow your setup sheet to complete them.

Note

If an error message is displayed on the LCD, see “LCD Messages” on page 85.

When the machine is left inactive for more than 4 minutes 30 seconds, the LCD goes off

automatically and the machine enters the power saver mode. Press any button on the

Operation Panel except for [ON] to restore the display.

Important

Always turn off the machine before disconnecting the power cord. This ensures the FINE

Cartridge is covered to prevent it from drying out.

If the machine is not used for an extended period of time, we recommend making copies or

performing FINE Cartridge cleaning about once every month to prevent degradation of the FINE

Cartridge.

The FINE Cartridge has many nozzles in order to produce high-definition prints. In the same

way that the tip of a felt-tip or marker pen will naturally dry out over time and become unusable

even with the cap in place, the nozzles might become clogged. Periodically printing or

performing FINE Cartridge cleaning can help to prevent this kind of clogging.

If you change to another telephone line, turn off the machine before unplugging the telephone

line cable.

Note

The power cannot be turned off with [ON] while the machine is operating.

Summary of Contents for JX510P



































































































Search results

Summary of Contents for JX510P

Reviews:

Related manuals for JX510P

Brands by name

Popular brands

Canon JX510P, User Manual

Search results

Summary of Contents for JX510P

Reviews:

Related manuals for JX510P

Brands by name

Popular brands