2B996-016JA
29
7� 4 E� TRG (External trigger)
Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, and 1 frame images are output.
There are two modes: 1P SR, PW SR.
( 1 ) 1P SR (1 Pulse Trigger SYNC-RESET)
Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, the vertical sync signal is reset
and frame images are output.
・
1 Pulse Trigger SYNC-RESET Picture Output Timing
Negative polarity mode
Trigger *
1
Positive polarity mode
Approx. 0 to 1H *
2
Approx. 2H
Exposure period *
3
Exposure completion
Approx. 26H
(Internal VD) *
4
RGB data
(video interval image)
FVAL
LVAL,
DVAL
*
5
13H (Partial scanning OFF)
11H (Partial scanning ON)
Trigger signal
to internal
signal sensor
*1: External input signal
*2: Frame rate NORMAL mode: 1H = 13.74 μs / FAST mode: 1H = 11.31 μs
*3: Exposure time is determined by the EXP setting on the menu. (See page 16)
*4: VD is generated after about 26H following the completion of the exposure period, and the video is synchronized
to this and output.
*5: When NR is set to ON, 1H is increased.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trigger, there will
be an effect on the video.
Summary of Contents for JCT-TF5G
Page 39: ...2B996 016JA 39 ...