manualshive.com logo in svg

Canon IXUS310HS, User Manual

Share
Download
Canon IXUS310HS User Manual Download Page 186

List of Messages That Appear on the Screen

186

Lens Error

•

This error can occur if you hold the lens while it is in motion or when using it in a location 
with excessive dust or sand in the air.

•

If this error message continues to appear, contact a Canon Customer Support Help 
Desk as there may be a problem with the lens.

A camera error was detected (Error number)

•

If an error code appears directly after taking a picture, the shot may not have been 
recorded. Check the image in Playback mode.

•

If this error code reappears, note the Error number (Exx) and contact a Canon 
Customer Support Help Desk as there may be a problem with the camera.

File Error

•

Photos from other cameras or images that have been altered using computer software 
may not be printable.

Print error

•

Check the paper size settings. If this message appears when the settings are correct, 
turn the printer off and back on, then make the settings again.

Ink absorber full

•

Contact a Canon Customer Support Help Desk for an ink absorber replacement.

Summary of Contents for IXUS310HS

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands