Canon iR6570 series, Installation Procedure

Page: 24 / 62

Chapter 1
16
F-1-32
When removing the spacer, move it to the right and
pull it out lifting the front side.
F-1-33
2) Pull out the half of the right deck and the cassette,
open the lower right cover, and remove the pick-up
roller pressure release spacers [1] for the right deck,
the third, and the fourth cassette.
Reference:
The spacers are removed by pulling out the half of the
deck/cassette because the spacers are pressured and
difficult to be removed if the deck/cassette remain set.
F-1-34
3) After removing the spacers, close the deck/cassette
and the lower right cover.
4) Attach the door tape of the manual feed tray cover
using the screw, and close the tray cover.
1.2.8
Installing the Deck
Pressure Plate
0008-8062
iR5570 / iR6570
1) Press the release button of the left deck, and pull out
the left deck.
2) Mount the deck pressure plate [1] in the package
using the RS screw [2], which is also in the
package.
F-1-35
3) Close the left deck.
[1]
[1]
[1]
[1]
[2]