Canon iR6570 series, Installation Procedure

Page: 31 / 62

Chapter 1
23
F-1-52
6) Put back the cassette 3/4 to the machine.
7) Perform the following service mode after the
adjustment.
Cassette 3
COPIER > FUNCTION > CST > C3-STMTR/A4R
Use it to register the paper width basic value of the
cassette 3.
1) Put STMTR/A4R paper in the cassette3, and
adjust the slide guide plate to the width.
2) Select C3-STMTR/A4R to highlight, and press
the OK key so that the machine executes auto
adjustment and register the value.
Cassette 4
COPIER > FUNCTION > CST > C4-STMTR/A4R
This operation is similar to cassette 3.
<Front Deck Left/Right>
1) Press the release button to draw out the front deck
left/right.
2) Loosen the 2 screws [2] and 2 fixing screws [3] of
the deck front cover [1].
F-1-53
3) Move the cassette plate (front) [1] frontward or
backward to adjust.
Backward: The side registration value (left margin)
is decreased.
Frontward: The side registration value (left margin)
is increased.
F-1-54
4) Make sure that the side registration values (left and
right margins) of a copy made from the front deck
left/right are L1 = 2.5±1.5mm respectively.
F-1-55
[1] Paper feed direction
5) Tighten the 2 screws [2] and 2 fixing screws [3] of
the deck front cover [1].
F-1-56
6) Put back the front deck left/right to the machine.
<Manual Feed Tray>
[1]
[1]
[2]
[2]
[3]
[3]
[1]
image
L1
[1]
[1]
[2]
[2]
[3]
[3]