Canon iR6570 series, Installation Procedure

Page: 48 / 62

Chapter 1
40
1.7 Installing the NE Controller
1.7.1 Installing the NE Controller-A1
0009-2246
iR5570 / iR6570
The following are installation steps specific to iR6570/5570 series.
Refer to the Installation Manual included with the NE controller-A1 for various settings, operations check, and points
to note.
1) Remove the upper cover of the controller (refer to the Installation Manual).
2) Connect the AC adapter plug to the controller (refer to the Installation Manual).
3) Remove the 4 screws [1], and detach the blanking plate [2] of the rear upper cover.
F-1-89
4) Draw out the cable [1] for the controller, and connect it to the controller cable [2].
[2]
[1]