List of Error Messages
3-94
3
Troubleshooting
Remove the paper from the booklet tray.
Cause
Prints from the previous job remain in the Booklet tray of the optional Saddle Finisher-AE2.
Remedy
Remove the prints remaining in the Booklet tray. Printing automatically resumes.
Replace toner cartridge.
Cause 1
Printing will not be possible soon because the toner is running low.
Cause 2
Printing is not possible because the toner has run out.
Remedy
Replace the toner cartridge. (See “Replacing the Toner Cartridge,” on p. 2-49.)
Place the original on the platen glass.
Cause
The specified mode requires that the original be placed on the platen glass, but there is no original
on the platen glass.
Remedy
Place the original on the platen glass.
Remove the original from the platen glass.
Cause
An original remains on the platen glass.
Remedy
Remove the original from the platen glass, and place the new original.
Remove the original from the feeder.
Cause
The machine cannot scan your original using the feeder. An original is placed in the feeder and on
the platen glass.
Remedy
Remove the original from the feeder.
Summary of Contents for iR3245
