Canon iR3245, Troubleshooting Manual

Page: 183 / 300

Clearing Paper Jams 3-61
3
Troubleshooting
Inside the Buffer Pass Unit-E2 of the Finisher-AE1/Saddle
Finisher-AE2 (Optional)
If a paper jam occurs inside the buffer pass unit of the optional Finisher-AE1 or optional Saddle
Finisher-AE2, a screen similar to the one shown below appears on the touch panel display. Check
the location of the paper jam, and follow the procedure described below, and the procedure that
appears on the touch panel display, to remove the jammed paper.
There are some areas inside the machine which are subject to high-voltages. When removing
jammed paper or when inspecting the inside of the machine, do not allow necklaces, bracelets,
or other metal objects to touch the inside of the machine, as this may result in burns or electrical
shock.
When removing jammed paper, take care not to cut your hands on the edges of the paper.
When removing paper which has become jammed inside the machine, take care not to cut your
hands or injure yourself on the inside of the machine. If you cannot remove the paper, contact your
local authorized Canon dealer.
When removing paper which has become jammed inside the machine, take care not to allow the
toner on the jammed paper to come into contact with your hands or clothing, as this will dirty your
hands or clothing. If they become dirty, wash them immediately with cold water. Washing them with
warm water will set the toner, and make it impossible to remove the toner stains.
When removing paper which has become jammed inside the machine, remove the jammed paper
gently to prevent the toner on the paper from scattering and getting into your eyes or mouth. If
the toner gets into your eyes or mouth, wash them immediately with cold water and immediately
consult a physician.
•
•
•
•