Canon iR2545i Troubleshooting Manual Download Page 5

Page: 5 / 39

Page

Self-diagnostic Display

The machine displays simple messages and codes that help you understand what is occurring in
the machine. Use these messages and codes to identify the actions you need to take to solve
problems, when necessary.

Error Messages

If the machine displays an error message, follow the instructions on the touch panel display.

Load A4 Paper

Cause

The optimum paper size selected by the Automatic Paper Selection mode is not available in the

machine.

Remedy

Load the indicated paper size into the machine. If you press start while this message is

displayed, prints are made with the currently selected paper size.

Remedy

If the message continues to be displayed even after the indicated paper size is loaded, enable

the paper drawer for the desired functions.

Cannot complete searching due to timeout. Check the settings.

Cause

The machine could not search for destinations within the specified time.

Remedy

Increase the time setting for Search Timeout in Register LDAP Server

Cause

The machine could not authenticate a user against an authentication server and retrieve attributes

about the user from the server within the specified time.

Remedy

Increase the time setting for <Timeout Settings> on the Send Function

Authentication

Settings

page.

Cause

An error occurred on the LDAP server side.

Remedy

Check that the LDAP server is functioning normally.

Cannot connect to the selected server. Check the settings.

Cause

The machine cannot connect to the specified IP address/port.

Remedy Check the gateway address setting.

Remedy Check the server address and port number for the LDAP server.

Remedy Check that the LDAP server is operating properly.

Remedy If <Login Information> is set to 'Use (security authent.)' for the LDAP server, check whether

Summary of Contents for iR2545i








































Search results

Summary of Contents for iR2545i

Reviews:

Related manuals for iR2545i

Brands by name

Popular brands

Canon iR2545i, Troubleshooting Manual

Search results

Summary of Contents for iR2545i

Reviews:

Related manuals for iR2545i

Brands by name

Popular brands