Canon iR2270 Series, Service Manual

Page: 871 / 1008

P017 STACKER 0 Stapler slide standby 1:ON
1 Stapler CW 1:ON
2 Stapler CCW 1:ON
3 Not used
4 Stapler slide phase A
5 Stapler slide phase B
6 Not used
7 Not used
P018 STACKER 0 Not used
1 Not used
2 Stapler HP sensor 1:ON
3 Staple Ready signal 1:ON
4 Staple Present signal 1:ON
5 Stapler connection signal 0:ON
6 Stapler slide HP sensor 1:ON
7 Stapler - alignment plate interference
sensor
1:ON
P019 STACKER 0 Stapler slide current switching 0 0:ON
1 Stapler slide current switching 1 0:ON
2 Under-bundle roller clutch 1:ON
3 Shutter clutch 1:ON
4 First paper ejection roller spaced
solenoid
1:ON
5 Buffer paper rear-end press solenoid 1:ON
6 Bundle-out motor current switching 1 0:ON
7 Bundle-out motor current switching 0 0:ON
P020 STACKER 0 Bundle-out motor phase A
1 Bundle-out motor phase B
2 Bundle-out motor phase A-
3 Bundle-out motor phase B-
4 Ejection-position paper detection sensor 1:ON
5 Scalable interlock 1:ON
6 Shutter HP sensor 1:ON
Address Controller Bit Display contents Remark
s