Canon iR2270 Series, Service Manual

Page: 791 / 1008

The original to be transmitted is not placed
properly.
Start over from the beginning.
# 012
The target is out of recording paper, and
transmission has failed.
Ask the target to supply recording paper.
# 018
There is no response to a redial attempt. Check to make sure that the target is ready for
communication; then, try once again.
The target is engaged for a different
communication, and transmission has failed.
Check to make sure that the target is ready for
communication; then, try once again.
The settings do not match the settings of the
target, and the transmission has failed.
Check to make sure that the target is ready for
communication; then, try once again.
# 022
The particulars of the group address selected as
the forwarding target may have been deleted, or
there is no more than a user box, thus causing
the transmission to fail.
Try transmitting once again.
The attempt to transmit to an address registered
in the address book has failed because the
address has been removed from the address
table while in wait for transmission.
Try once again.
# 037
There is a shortage of memory, not permitting
reception.
Remove error files and unnecessary files to
increase available memory.
# 080
F code is not set on the target. Check the F code of the target, and start over.
# 081
The appropriate password is not set on the
target.
Check the password of the target, and start
over.
# 099
The transmission has been suspended in the
middle.
Start over.
# 102
There is a mismatch of F code or password. Check the F code and the password of the
target, and start over.
# 107
Cause Remedy