Canon iR2270 Series, Service Manual

Page: 852 / 1008

T-16-2
COPIER > DISPLAY > ACC-STS
Sub-item Description Level
FEEDER DADF connection status
0: Not connected 1: Connected
1
SORTER Finisher and punch unit connection status
Sorter type 0: None 1: Finisher 2: Saddle finisher
Punch type 0: None 1: 2 holes 2: 2/3 holes 3: 4 holes (fr) 4: 4 holes
(sw)
1
DECK Paper deck connection status
0: Not connected 1: Connected
1
CARD Card reader connection status
0: Card reader connected with no card inserted
1: Card reader not connected or connected with card inserted
(1: Ready to copy, 0: Not ready to copy)
1
DATA-CON Copy data controller connection status
0: Not connected 1: Connected
1
RAM Capacity of the memory on the main controller circuit board 256 MB,
512 MB
1
COINROBO Coin vendor connection status
0: Not connected 1: Connected
1
NIB Network board connection status
0: No board connected
1: Ethernet board connected
2: Token ring board connected
3: Ethernet board and token ring board connected
1
PS/PCL Not used 1
NETWARE Netware firmware installation status
0: Not installed 1: Installed
1
SEND Send function addition status
0: Send function not added 1: Send function added
1
PDL-FNC1/2 Valid PDL
0000 0000 0000 0000 to 1111 1111 1111 1111 (0:OFF,1:ON)
b31 to b16 for PDL-FNC1
b15 to b0 for PDL-FNC2
b31: BDL, b30: PS, b29: PCL, b28: PDF, b27: LIPS, b26: N201, b25:
I5577, b24: ESC/P, b23: HPGL, b22: HPGL2, b21: IMAGING, b20:
KS, b19 to b0: Reserved
1
HDD Model name of the hard disk drive 1