Canon iR2018 Series, Service Manual

Page: 284 / 348

Chapter 15
15-18
15.5.8 <016: time length to first response at time of fax/tel switchover>
0017-6108
Allows setting of the time from seizing the line till pseudo RBT is sent, when the Fax/ Tel switching function is operating.
15.5.9 <017: pseudo RBT signal pattern ON time length><018: pseudo RBT signal pattern OFF time length (short)><019:
pseudo RBT signal pattern OFF time length (long)>
0017-6109
Use it to set the pattern of the pseudo RBT signal transmitted at time of a fax/tel switchover.
15.5.10 <020: pseudo CI signal pattern ON time length><021: pseudo CI signal pattern OFF time length (short)><022:
pseudo CI signal pattern OFF time length (long)>
0017-6110
Use it to set the pseudo CI signal pattern transmitted at time of a fax/tel switchover.
15.5.11 <023: CNG detention level for fax/tel switchover>
0017-6111
Use it to set the CNG detention level for a fax/tel switchover.
15.5.12 <024: pseudo RBT transmission level at time of fax/tel switchover>
0017-6112
Use it to set the pseudo transmission level for a fax/tel switchover.
15.5.13 <025: Answering machine connection function signal detection time>
0017-6113
Sets the signal detection time for the answering machine connection function operation. When the answering machine connection function is operating, if the func-
tion does not operate normally because the fax does not detect CNG signal sent from the line, raise this parameter to increase the signal detection time.
15.5.14 <027: V.21 low-speed flag preamble identification length>
0017-6114
Use it to detect the time of detection after which command analysis is started after detecting V.21 low-speed command preambles continuously for a specific period
of time.
15.5.15 <055: Acquisition period of environmental log data>
0017-8531
Use it to change the acquisition period of environmental log data.
15.5.16 <056 - 061: Count type select >
0017-6115
Use it to confirm the count type indicated on the Counter Check screen, which appears in response to a press on the Counter key.
When '0' is selected, count type will not be indicated.
No.56: Use it to indicate the type of software counter 1 of the control panel. The type of soft counter 1 cannot be changed.
No.57: Use it to change the type of soft counter 2* of the control panel to suit the needs of the user.
No.58: Use it to change the type of soft counter 3* of the control panel to suit the needs of the user.
No.59: Use it to change the type of soft counter 4* of the control panel to suit the needs of the user.
No.60: Use it to change the type of soft counter 5* of the control panel to suit the needs of the user.
No.61: Use it to change the type of soft counter 6* of the control panel to suit the needs of the user.
*:The default type settings of soft counter is different from models.
<Soft Counter Specifications>
The soft counters are classified a follows in terms of input numbers:
100s: total
200s: copy
300s: print
400s: copy + print
500s: scan
700s: received file print
800s: report pint
900s: transmitted scan
Guide to the Table
- 1:Count sheets of all sizes by one.
- 2:Count sheets of the large size by two.
- C:full color
- Bk:black mono
- L:large size (larger than A4/LTR)
- S:small size (A4/LTR or smaller)
MEMO:
To make a change so that B4 papers (for print) will be counted as large-size, use service mode: make the following selections, and change bit 0 to '1': #SSSW>SW33.
To make a change so that B4 papers (for scan) will be counted as large-size, use service mode: make the following selections, and change bit 2 to '1': #SSSW>SW33.
Seri
al
No.
on
coun
ter
chec
k
scree
n Counter type Print system
Bk 1-sided L
Bk 1-sided S Bk 2-sided L Bk 2-sided S
Local
copy PDL
print FAX
print Repo
rt
print Local
copy PDL
print FAX
print Repo
rt
print Local
copy PDL
print FAX
print Repo
rt
print Local
copy PDL
print FAX
print Repo
rt
print
101 Total1 1 1 1 1 1 1 1 1
102 Total2 2 2 2 2 1 1 1 1
103 Total (L) 1 1 1 1
104 Total (S) 1 1 1 1
108 Total (Bk1) 1 1 1 1 1 1 1 1
109 Total (Bk2) 2 2 2 2 1 1 1 1
112 Total (Bk/L) 1 1 1 1
113 Total (Bk/S) 1 1 1 1
114 Total1 (2-sided) 1 1 1 1 1 1 1 1