—
12
—
Note:
When this key is set to "1", the device will
always respond "0" to the demands of job
history reference from the remote
applications. Therefore, software, such as
NetSpot Accountant, which manages the
device using the job history, cannot be
used.
3. OFF/ON of connection devices
Re-start procedure may change with
connection apparatus used.
When the setting of the Service mode is
changed, need to turn off/ on the power of
connection devices.
1) Press the power switch on the control
unit for 3 seconds or more.
2) Following the instructions displayed on
the shutdown sequence step by step with
operations to select appropriate items on
the touch panel so that the main switch can
be ready for turning off.
3) Turn the main power off.
F-1-2
4) Turn the main power on.
Memo:
If the target data to be erased completely
remain in the HDD at the time of turning
off the main power, the erasing operation
will be carried out at the start-up.
[3]
[2]
[1]
ON/OFF
