—
8
—
Note: MEAP backup function using SST
Concerning data backed up with
MEAPback of SST before starting the
security kit, it must not be re-written to the
iR machine after the security kit starts to
run. Also, if data backed up after the
security kit starts to run is re-written to an
iR machine that the security kit is yet to
run, it does not work properly. It is
absolutely necessary to match operating
conditions of the security kit before and
after backup work. For that reason, backup
is impossible with the MEAP backup
function while installing the security kit.
The following procedures are for stopping
MEAP applications, disable licenses, and
downloading license files. Refer to the
MEAP SMS Administrator Guide for
details.
Stopping/Disabling MEAP applications,
Downloading license files, Uninstalling
MEAP application.
(1) Select the following URL to access
SMS.
http://[Device IP Address]:8000/sms
If user changed a SMS password from a
default, ask the user to login or ask the user
to change the password after the security
kit starts to run. The default password is
[MeapSmsLogin].
Note:
SMS password will be initialized after the
security kit starts to run.
Therefore, be sure to ask user to change a
password.
(2) Select the radio button of an application
to be stopped from the Application list
page, and click stop.
(3) Click name of application that a license
is Installed, and access the Application
License Information page.
(4) Click License Management, and click
Disable. Click OK on the Disable license
file confirmation screen.
(5) Click download from Download/Delete
Disabled License File.
Specify a storage location of a file
according to indications on the screens. At
this time, name the file to easily identify an
application and its disable license file.
Click deletion after the disable license file
is downloaded to PC. Click OK on the
Delete disabled license file confirmation
screen.
(6) Go back to the application list page, and
select the radio button of an application to
be uninstalled. Then, click uninstall. Click
OK on the uninstallation confirmation
screen. Repeat the steps (1) to (6) if there
are multiple applications.
(7) After the security kit starts to run, re-
install applications using application files
(jar file) of applications and the backed up
disable license files (.lic file).
